How to Download and Use Icom CS-V8000 Cloning Software for Your IC-V8000 Mobile Transceiver
If you own an Icom IC-V8000 mobile transceiver, you may want to program its memory frequencies, tones, offsets and other settings using a computer. This can save you time and hassle compared to manual programming. To do this, you will need the Icom CS-V8000 cloning software and a compatible interface cable.
The Icom CS-V8000 cloning software is a CD-ROM that contains the application software and a driver for the interface cable. You can purchase it from various online retailers, such as DX Engineering[^1^], or download it from some websites, such as The DXZone.com[^2^]. However, be careful to download only from trusted sources and scan the files for viruses before installing them.
The interface cable is a USB-29A cable that connects your computer's USB port to the transceiver's microphone jack. You can also purchase it from DX Engineering[^1^] or other vendors. Alternatively, you can use a generic USB-to-serial adapter and a CT-17 CI-V level converter to connect your computer's serial port to the transceiver's ACC jack.
Before using the cloning software, make sure your computer meets the minimum system requirements. According to DX Engineering[^1^], you will need an IBM-compatible PC running Windows 7 operating system. You will also need to install the driver for the interface cable before connecting it to your computer and transceiver.
Once you have everything ready, you can launch the cloning software and follow the instructions on the screen. You can read or write data from or to the transceiver's memory channels, scan edges, call channels and set mode. You can also edit the data on your computer and save it as a file for future use. The cloning software has a user-friendly interface that allows you to view and modify various parameters easily.
Using the Icom CS-V8000 cloning software can make programming your IC-V8000 mobile transceiver much simpler and faster. However, if you encounter any problems or have any questions, you can refer to the user manual of the cloning software or contact Icom technical support for assistance.
In this section, we will show you how to download the Icom CS-V8000 cloning software from The DXZone.com. This is one of the websites that offer the cloning software for free. However, as we mentioned earlier, you should always be careful when downloading files from unknown sources and scan them for viruses before installing them.
To download the cloning software from The DXZone.com, follow these steps:
Go to https://www.dxzone.com/dx12034/cs-v8000-cloning-software.html in your web browser.
Click on the \"Visit Site\" button under the \"CS-V8000 Cloning software\" title. This will take you to another page where you can download the file.
Click on the \"Download\" button next to the file name \"CSV8000.zip\". This will start the download process. You may need to confirm or allow the download depending on your browser settings.
Save the file to a location of your choice on your computer. Make sure you remember where you saved it.
Extract the contents of the ZIP file using a program such as WinZip or 7-Zip. You should see two files: \"CSV8000.exe\" and \"Readme.txt\".
Double-click on the \"CSV8000.exe\" file to install the cloning software. Follow the instructions on the screen to complete the installation.
Read the \"Readme.txt\" file for more information about the cloning software and how to use it.
You have now downloaded and installed the Icom CS-V8000 cloning software from The DXZone.com. You can use it to program your IC-V8000 mobile transceiver as described in the previous section. aa16f39245